The dryer will not power on or begin tumbling when started. Learn what the symptom can mean, which checks are safe, and when to call for appliance repair.
If your dryer is showing this problem, the cause may range from a simple setting or obstruction to a part that needs diagnosis. Use the safe checks below, avoid risky disassembly, and call Appliance Response when the issue repeats or affects normal use.
Common symptoms
no response
click but no start
panel blank
Possible causes and repair-level concerns
These are common repair-level possibilities, not a remote diagnosis. Safe homeowner checks are listed separately below.
Professional Diagnosis Likely Needed
Door switch, thermal fuse, start switch, or belt switch issue
Door switch, thermal fuse, start switch, or belt switch issue. Diagnosis or repair usually requires safe appliance access, testing, and the correct parts when replacement is needed.
Professional Diagnosis Likely Needed
Motor, timer, or control-board failure
Motor, timer, or control-board failure. Diagnosis or repair usually requires safe appliance access, testing, and the correct parts when replacement is needed.
Professional Diagnosis Likely Needed
Power supply or wiring diagnosis
Power supply or wiring diagnosis. Diagnosis or repair usually requires safe appliance access, testing, and the correct parts when replacement is needed.
Professional Diagnosis Likely Needed
Safety thermostat or high-limit condition
Safety thermostat or high-limit condition. Diagnosis or repair usually requires safe appliance access, testing, and the correct parts when replacement is needed.
Stop Using The Appliance
Stop using the appliance if safety symptoms appear
Stop use and arrange service if you notice burning smell, smoke, sparking, repeated breaker trips.
Safe checks before calling
Confirm the door closes and the start control is engaged. Stop if anything feels unsafe or the symptom worsens.
Check the breaker once without repeated resets. Stop if anything feels unsafe or the symptom worsens.
Note whether lights, clicks, or motor hum occur. Stop if anything feels unsafe or the symptom worsens.
When professional repair may be needed
Door switch, thermal fuse, start switch, or belt switch issue.